How long can the fiber laser marking machine buy it back? This can also be said to be the most important problem for laser manufacturers. After all, the service life of a device is directly related to cost investment problems and how much value can be created. As a machine -class machine, optical fiber laser marking machines will have a certain loss during work. As the use time is longer, the working ability will be reduced to a certain extent. So how many years are the service life of a fiber laser marking machine?
How long does the optical laser marking machine use? What are the precautions?
First, as the core part of the fiber laser marking machine, the quality of the laser directly affects the work efficiency of the entire laser marker. Laser life laboratory data is usually 100,000 hours. It can be used for 11 years according to the work of 24 hours a day. Excluding laser attenuation, causing the labeling to the workpiece, the output of 40%of the laser can be used as the benchmark for six years.
Of course, this is the theoretical data of the laboratory. It is different from the actual production environment and degree of use. According to the data of Shangtuo Laser customers, most of the fiber laser marking machines have been used for 5 years on the user site. Essence However, there are also some clients that often change parts or say that they can not be used in less than 5 years. So what do you need to pay attention to in the daily use process, let’s take a look at the editor of Shang Tuo Laser below.
Develop good operating habits and regularly maintain and maintain the machine. To a certain extent, it can improve the life of optical fiber laser marking machines. The following summarizes a series of specific methods for maintenance of optical fiber marking machines.
1) When the machine is not working, the marking machine and the computer should be cut off.
2) When the machine is not working, cover the field lens to prevent dust pollution and optical lenses.
3) The circuit is high -voltage when working at this machine. Non -professional personnel should not be maintained at the time of power, so as not to occur at the electric shock accident.
4) Any failure of this machine should immediately cut off the power.
5) The equipment is used for a long time. The dust in the air will be adsorbed on the surface of the sub -focused mirror. The light will reduce the power of the laser and affect the marking effect. When the labeling effect is not good, carefully check whether the surface of the focusing mirror is polluted.